歡迎您來到寧波瑞德檢測儀器有限公司網站!
更新時間:2017-09-18
寧波瑞德檢測儀器有限公司專業美國蓋茨GATES筆式皮帶張力計7401-0076:我公司長期供應美國GATES皮帶張力計7401-0076,性能好,價格合理,配有中英文使用說明書,!
寧波瑞德檢測儀器有限公司
地 址:寧波莊橋新都路189號
郵 編:315200
:袁建華
電 話:
傳 真:
手 機:
:
地址:www.ruide17.com www.rd-17.com
寧波瑞德檢測儀器有限公司專業美國蓋茨GATES筆式皮帶張力計7401-0076:
美國蓋茨GATES筆式皮帶張力計7401-0076
我公司長期供應美國GATES皮帶張力計7401-0076,性能好,價格合理,配有中英文使用說明書,!
簡單介紹
筆式皮帶張力計美國GATES筆式皮帶張力計 您知道正確的皮帶張力計可延長皮帶壽命20%-50%嗎? zui快速,簡便,精確的皮帶張一3檢測工具-筆式皮帶張力計 適用于各種V型皮帶,正時皮帶的張力檢測! 現貨供應!
筆式皮帶張力計(美國GATES筆式皮帶張力計)的詳細介紹
美國GATES筆式皮帶張力計
您知道正確的皮帶張力計可延長皮帶壽命20%-50%嗎?
zui快速,簡便,精確的皮帶張一3檢測工具-筆式皮帶張力計
適用于各種V型皮帶,正時皮帶的張力檢測!
HOW TO USE?
1. CAUTION:Before doing maintenance or tensioning on belt drives,turn equipment off and lock outthepowersource.Use guards on machinery when running.
Place amatchedsetof belts over the sheave grooves.Take up the slack untilthebeltsappear fairly taut.
2. With the drive stopped,measure the belt span lenth of yourdrive(seesketch).Set the rubber O-ring on the body of the tensiongaugeat thedimension equal to 1/64 inch ×32,1/2 inch.
3. Set the O-ring on the plunger at 0 against the body ofthetensiongauge.
4. With the tension gauge perpendicular to the span,apply a forcetoabelt in the center of the span.Deflect the belt until bottomofthelarge O-ring is even with the top of the next belt,or thebottomofa straight edge laid across the top of
other belt(s)onthedrive.Release pressure and read pounds of force used atO-ringonplunger.
Note:When new belts are installed on a drive,the tension willdroprapidlyduring the first few hours.Thus,for new belts,tightentothe initialinstallation defection force shown in thetablesbelow.Check tensionfrequently during the first 24 hoursofoperation.Subsequentretensioning should fall between theminimumand maximum forces shownin the tables.
5. Compare the force required in step 4 with the ranges inthetablesbelow.
Tightenorloosenbelts to bring them into the recommened range.
Note:The proper tension for V-belt drive is the lowest tensionatwhichthe belts won’t slip under peak load condition ,深圳 , 寧波 上海